A Complete Step by Step guide to Setting up your OXYTAP Model 5
What’s In the Box:
- 1x OXYTAP Model 5
- 2x Water Bottle
- 1x Faucet / Nozzle
- 1x Power Cord
- 1x Drip Tray
- 1x Drain Box
Step 1: Connect the Power Cord
Ensure Power Cord is fully inserted
Step 2: Attaching the Drain Box
Ensure Drainage Hole is positioned upwards
Discard Water when Drain Box is 3/4 Full
Step 3: Installing Faucet/Nozzle
ALign Faucet/Nozzle Handles to the Faucet Connector
Twist Faucet/Nozzle Anti Clockwise till it locks in place
*Some OXYTAP devices are shipped with the faucet/nozzle preinstalled for ease of use
Step 4: Preparing OXYTAP for Infusion/Oxygenation
Ensure water level is 1.5″ – 2″ above the Faucet/Nozzle intake hole
Step 5: Switching On OXYTAP
OXYTAP Blinks and Chimes indicating it is powered ‘ON’
Step 6: Charging OXYTAP
Upon Powering On OXYTAP (either switch or main plug turned Off and On again), a charge of 8 mins is required to Charge OXYTAP with oxygen
Step 7: Post Infusion / Charge
OXYTAP Light switch off with a Chime, indicating a complete infusion cycle.
*discard water from First Charge upon unboxing for hygiene purposes*
