Composition and Features
Composition
Features
| 1 | Front LED |
| 2 | Operation Button |
| 3 | Faucet / Nozzle |
| 4 | Power switch |
| 5 | Connector |
Warning and Caution Symbols and Meanings
Failure to follow the instructions can result in a hazard of serious injury, death or accident.
Failure to follow the instructions might result in a hazard of minor or moderate injury, property damage, product failure or deterioration in performance of the product.
Device Specifications
| Product Name | Oxygen Water Maker |
| Model Name | FL – 2000s |
| Safety Certification No. | XH070246-24002 |
| Electromagnetic Compatibility (EMC) Registration No. | R-R-LOF-FL-2000s |
| Rated Voltage | AC110V~240V |
| Rated Power Consumption | 45W |
| Oxygen Generator | DC5V |
| Safety Device | Built-in fuse type |
| Product Weight | 3.5kg |
| Usable Water | Natural Water or Purified Water (Lower than 40℃) |
Safety Precautions
Failure to follow the instructions can result in a hazard of serious injury,death or accident. Read and understand the safety precautions completely before using the product.
This Product is 110V~240V AC regulated.
Before use, read indications in accordance with Electric Appliances Safety Control Act attached to the product (you can check on the back of the product) and use instructions. Failure to follow the instructions can result in a hazard of safety accidents such as failure, fire, electric shock.
Do not plug the product together with other products in the same electrical outlet exceeding the rated voltage. If the product is used together with other products, the resulting overload may cause safety accidents such as product failure, fire or electric shock.
Use the product in a standing upright position and on a solid surface, failure to do so can result in safety accident, such as product failure, fire or electric shock.
Please ensure that the ventilation opening in the product is not covered. The overheating may cause the risk of safety accidents such as product to fail, fire or electric shock.
Use the product indoors only. If used outdoors, the risk of safety accidents,such as product failure, fire or electric shock, can result.
Avoid using the product in a high humidity or in wet area. If water enters inside the product, the risk of safety accidents, such as product failure, fire or electric shock, can result.
Do not place the product in a direct sunlight or in a dusty or greasy place. Risk of safety accidents such as product failure, fire or electric shock can result.
Place the unit where it is easy to unplug. Short-circuit can result in risk of safety accidents, such as product failure, fire or electric shock.
Do not touch the power cord, power plug or power switch with a wet hand. Risk of safety accidents, such as product failure, fire or electric shock, can result.
If the sheath around the power cord is peeled off or the metal in the power plug gets loose or rusty or damaged, stop using it immediately and contact our aftersales service center. Otherwise, risk of safety accidents, such as product failure, fire or electric shock, can result. If the power cord is damaged, the dealer or qualified person must replace the cord.
Unplug the power cord regularly from the electric socket and wipe out foreign substances (dust,water etc.) with a dry cloth. Such foreign substances in the plug can result in the risk of safety accidents, such as product failure, fire or electric shock.
Do not bend excessively, pull, twist or tie the power cord or power plug. Avoid them being pressed under other product or a heavy object.
Never unplug the power plug by pulling the power cord. Grip plug firmly and pull straight from the outlet.
Otherwise, risk of safety accidents, such as product failure, fire or electric shock, can result.
Use natural water or purified water lower than 40℃. Hot water can result in risk of safety accidents, such as product failure, fire or electric shock.
Do not disassemble or modify the product. Risk of safety accidents, such as product failure, fire or electric shock, can result.
This equipment is not intended for use by persons (including children) with physical, sensory, or mental impairments, or lack of experience and knowledge, unless they are supervised or instructed to use the equipment safely.
Please ensure that children do not play with the equipment.
If water leaks from inside of the product or is stagnant around the product, stop using it immediately and contact our aftersales services center. Risk of safety accidents, such as the product failure, fire or electric shock, can result.
If the product does not work properly (abnormal noise, smell, smoke etc), contact our aftersales services center.
Do not use the product near any heat sources (e.g. microwave oven, stove etc). Risk of safety accidents, such as product failure, fire or electric shock, can result.
Do not put inflammable substances (e.g. butane gas, oil, gas, spray etc.) around the product. Risk of safety accidents, such as product failure fire or electric shock, can result.
Do not spray perfume, pesticide, inflammable spray, air freshener, deodorant etc. near the product. Risk of safety accidents, such as product failure, fire or electric shock, can result and they are harmful to a human body.
Make sure that foreign substances (e.g. coin, pin, sand, medicine etc.) not to enter into the product. In particular, children should be supervised to ensure they do not play with the product
Avoid applying shock to the product or placing any load on it. Risk of safety accidents, such as product failure, fire or electric shock, can result.
Please remove the plug from the socket outlet before cleaning or maintaining the product. Risk of safety accidents, such as product failure, fire or electric shock, can result.
Wipe the unit with a soft and dry cloth. Do not spray water directly on the product or wipe it with alcohol, thinner or benzene. The resulting discoloration or deformation may cause a risk of safety accident, such as the product failure, fire or electric shock etc.
Installation Method and Preparation Before Use
Step 1
Connect the socket on the power cord to the product’s connector.
Step 2
Install the product in a place and method compliant with safety precautions. Then, plug the power plug in an electric outlet and turn on the switch ‘ l ’ on the back of the product. With melody, operating button LED in the upper part the product will blink for about 0.4 second
Step 3
Fill the water bottle with water until a faucet hole in the water bottle is submerged.
Use natural water or purified water under 40℃ or below.
Step 4
After attaching the water bottle and the faucet together, Push the faucet combined with the bottle into the groove of the product and turn it to arrow direction until it clicks into place.
When turning the water bottle, grip the faucet, not the bottle.
Step 5
If you press the operating button, with a buzzing sound, the operating button LED and a front LED lit and at the same time the product starts to operate. While it is in operation, if the faucet is removed, the product stops working.
In eight minutes, with melody the operating button LED goes out and the product is ready to use.
Remove the faucet from the unit by turning clockwise and throw away the water in it.
When turning the water bottle, grip the faucet, not the bottle.
How to Use
Step 1
Fill the water bottle with water until the faucet hole is submerged
Use natural water or purified water lower than 40℃. Hot water can result in risk of safety accidents, such as product failure, fire or electric shock
Step 2
After attaching the water bottle and the faucet together, Push the faucet combined with the bottle into the groove of the product and turn it to arrow direction until it clicks into place.
When turning the water bottle, grip the faucet, not the bottle.
Step 3
If you press the operating button, with a buzzing sound a front LED lit and at the same time the oxygen water maker starts to operate. While it is in operation, if the faucet is removed, it stops working.
After about three minutes, with melody, the operating button LED goes out and it stops working.
If left unused for more than three days, run STEP 1~ STEP 5 of the installation method.
If left unused for more than 36 hours, turn off the switch button for 10 seconds and turn on the button to reset the product.e water bottle, grip the faucet, not the bottle.
Step 4
Remove the faucet from the unit by turning clockwise. If the water bottle with a cover is kept refrigerated, the oxygen water can be preserved much longer
*If the faucet is not removed, melody signaling completion of production can be heard three times on an interval of 15 seconds. Then, the front LED fades out in 240 seconds
When turning the water bottle, grip the faucet, not the bottle.
Tips, Tricks & Troubleshoots
Oxygen generator absorbs water
The oxygen generator needs a small amount of water while producing oxygen. As such, the water in the water bottle may decrease slightly.
If you press the operating button without Installing the faucet
The operating button LED is kept unlit with the front LED blinking.
If you press the operating button or the faucet is installed, the front LED will go out.
Precautions on the types of water to be used in the machine
Use only clean natural water or purified water. Using other water will cause the product to fail.
Precautions on the types of water to be used in the machine
Use only clean natural water or purified water. Using other water will cause the product to fail.
Caution when using the faucet
The faucet is not a cover. If you hold the faucet with containing water bottle upside down or grip the bottle firmly, water may leak out of the faucet. Be careful.
Caution when using the faucet
The faucet is not a cover. If you hold the faucet with containing water bottle upside down or grip the bottle firmly, water may leak out of the faucet. Be careful.
If the water overflows when the unit and faucet joined together.
If the water bottle contains too much water or if you grip the bottle tightly, the water overflows. The product is designed such that excess water will come out of the drain hole. If this happens, wipe away the excess water. Despite such safety measures, care must be taken that you don’t fill water to the brim of the bottle or container.
If the water overflows when the unit and faucet joined together.
If the water bottle contains too much water or if you grip the bottle tightly, the water overflows. The product is designed such that excess water will come out of the drain hole. If this happens, wipe away the excess water. Despite such safety measures, care must be taken that you don’t fill water to the brim of the bottle or container.
If the drainer is filled with water
Check the amount of water in the drain tub.
The water in the drainer is Hydrogenated water produced from the oxygen generator. Empty the drainer if it is over 2/3. Discard the liquid, do not drink it.
Removable drainer.
Place the protruding drain pipe in a hole in the drain lightly then the magnet of the drainer can be secured in close contact with the product.
In case of product malfunction
Product failure
If the product fails to work, it sets off the alarm for about three seconds with the operating button LED blinking for about 0.4~1 second. Do not try to disassemble the product. Contact our aftersales service center immediately.
Product failure
If the product fails to work, it sets off the alarm for about three seconds with the operating button LED blinking for about 0.4~1 second. Do not try to disassemble the product. Contact our aftersales service center immediately.
When the loosening of the nozzle (faucet) or uncoupling from the main body by itself happen
Change or Purchase a new nozzle(faucet).
When the loosening of the nozzle (faucet) or uncoupling from the main body by itself happen
Change or Purchase a new nozzle(faucet).
When discolor of water after the production of oxygen water happens.
If discoloration of water happens after the production of oxygen water, please DO NOT drink and STOP using the product before contact our aftersales service center immediately.
When discolor of water after the production of oxygen water happens.
If discoloration of water happens after the production of oxygen water, please DO NOT drink and STOP using the product before contact our aftersales service center immediately.
When the amount of oxygen spouting from the nozzle (faucet) during operation is significantly reduced.
Stop using the product and contact our aftersales service center immediately.
When the amount of oxygen spouting from the nozzle (faucet) during operation is significantly reduced.
Stop using the product and contact our aftersales service center immediately.
Cleaning
Cleaning the Unit
Internal cleaning
(Ensure that if left unused over three days, an internal cleaning should be done).
After attaching the empty water bottle onto the faucet and connecting the unit, press the operating button to discharge remaining water inside from the product
External cleaning.
Wipe with a dry and soft cloth
Do not clean the product while being plugged in the power outlet or working. Risk of safety accidents, such as product failure, fire or electric shock, can result. Before cleaning, be sure to switch ‘OFF’ the power switch or unplug the product.
Cleaning the Faucet
Step 1
Detach the faucet and wash it with running water.
Step 2
After washing, dry it in a cool place before reuse.
Maintenance
Faucet Maintenance
Always keep the faucet dry when not in use.
Connect the faucet to the bottle only when making oxygenated water.
Remove the bottle immediately after making the water to keep the faucet dry.
DO NOT LEAVE THE FAUCET SUBMERGED IN WATER when not in
operation.
Faucet Cleaning Schedule
Weekly Cleaning
Once every 7 days, disassemble the faucet, rinse it under
running water, dry it completely, and reassemble it on
the machine.
Monthly Cleaning:
Once a month, disassemble the faucet, clean it using
a detergent, dry it completely, and reassemble it on the
machine.
Bottle Maintenance
Clean and dry the supplied bottles every 3 days to ensure they remain clean at all times.
